Call Us Toll-Free: 1-800-265-5674

Products: Smoke Alarms

ADDED FEATURES

Click a term below to view a detailed definition.

Easy identifying of an initiating unit in the event of a nuisance alarm, or after the alarm has silenced.The “Alarm Latching” feature allows quick and easy troubleshooting in the event of a nuisance or unidentifiable alarm condition. When an alarm is initiated, all interconnected BRK models will sound an audible alarm, however only the initiating unit will flash it’s Red LED indicator allowing the homeowner to easily identify the source. The LED can be reset at any time by simply pushing the “Silence / Test” button on the front of the unit. Even in the event power is disconnected to the circuit, the initiating alarm will hold the Alarm latch condition in memory, so when the power is reinstated, that unit only will continue to flash (without audible) until the “Silence / Test” button is pushed to re-set the system.
Easily identifies when a Battery Back-up model is in need of battery service.When the battery back-up source on any BRK model has reached a level where the battery must be serviced, the unit will emit a single beep approx every 45 second. Any units interconnected will also emit this warning beep, however only the unit in need of service will flash it’s Red LED allowing for easy identifying.
Quiets nuisance alarms.In the event of a ”nuisance alarm” condition (i.e. burning toast / food etc.) any BRK model can be silenced for up to 10 minutes by pushing the “Silence / Test” button on the front of the unit. This feature allows the offending condition to clear rather than forcing the end-user to disable the alarm to avoid the audible alarm. When the “Silence” button is initiated, the unit will go into a separate sensing mode that will closely monitor whether the density of the condition increases. If in the following 10 minute period the density increases, the alarm will over-ride the silence mode and the unit will again go into full alarm. If after the 10 minute silence period the condition has reduced, the unit will beep once, indicating it has reset to its normal sensing mode.
Silence a low battery beep.In the event a low battery indication (beep) happens at an inopportune time (i.e. overnight), the low battery warning can be silenced – 1 time only – for a period of 8 hours. This allows for servicing when more convenient.
Simple Mounting and alignment.All BRK models have been designed with ease of installation and servicing features in mind. “Easy Mount” allows for simple one hand mounting without aligning tabs. The wide rotation on the mounting plate also allows easy visual alignment, and, when placed in “nuisance alarm” prone areas (i.e. near kitchens or bathrooms) a simple ¼ turn on the mounting bracket can often alleviate these nuisance alarm conditions by altering the direction of air flow across the sensing chamber entry.
Ionization Smoke Alarms – Generally are more effective at detecting flaming fires, which consume combustibles quickly and spread rapidly. Sources of these fires include paper burning in a wastebasket, or grease fires on a stove.Photoelectric Smoke Alarms – Generally are more effective at detecting smoldering fires, which smolder for hours before bursting into flame. Sources of the fires include cigarette smoldering in couches or bedding. For maximum protection, install both types of smoke alarms on every level of the home.
HARDWIRE / 120VAC INTERCONNECTABLE

IONIZATION

9120A

120Vac Hardwire

  • Intelligent Ionization Sensing Technology
  • Alarm Latch – Remembers and identifies initiating alarms
  • Perfect Mount – Easy install and alignment
  • Single button Test / Silence feature
  • 10 year warranty

9120BA

120Vac Hardwire

  • Intelligent Ionization Sensing Technology
  • 9 volt battery back-up – EZ Access battery door
  • Two Latching features – Alarm latch and Low Battery latch
  • Two Silence Features – Silence low battery chirp for up to eight hours or, temporarily silence nuisance alarm conditions
  • Low battery warning
  • 10 year warranty

PHOTOELECTRIC

7010A

120Vac Photoelectric Smoke Alarm

  • Optipath 360 Technology – Patented Photoelectric smoke sensing design
  • Alarm latch – Remembers and identifies initiating alarms
  • Single button Test / Silence feature
  • 10 year warranty

7010BA

120Vac Photoelectric Smoke Alarm

  • Optipath 360 Technology – Patented Photoelectric smoke sensing design
  • 9 volt battery back-up – EZ Access battery door
  • Two Latching features – Alarm latch and Low battery latch
  • Two Silence Features – Silence low battery chirp for up to eight hours or, temporarily silence nuisance alarm conditions
  • Low battery warning
  • 10 year warranty

HEARING IMPAIRED

7010BSLA

120V AC/DC Photo Smoke / Strobe for Hearing Impaired

  • Optipath 360 Photoelectric smoke design
  • Visual and audible alarm signals – 177 Candela strobe and 1 Hz flash rate meets ADA, ANSI 117.1, NFPA 22, and UL1971 requirements for visual signaling devices
  • Smart Strobe – Distinguishes and warns between Smoke / Heat or CO dangers
  • Two latching features – Two Silence Features
  • Two AA battery back-up (Note: will not power strobe)
  • 10 year warranty

PHOTO / ION COMBO

3120BA

120V AC/DC Photo & Ion Combo Alarm

  • Dual smoke technologies: Optipath 360 Photoelectric and “Intelligent” Ionization combined
  • Two latching features – Alarm latch: Remembers and identifies initiating alarms. Low battery: Identifies affected unit
  • Two Silence Features – Silence low battery chirp for up to eight hours or, temporarily silence nuisance alarm conditions
  • Two AA battery back-up – EZ Access battery door
  • 10 year warranty
BATTERY OPERATED

IONIZATION

SAFA318A

Battery Operated Smoke Alarm

  • Ionization smoke sensing technology
  • Single button test / silence
  • Low battery warning
  • Operating LED light to show that alarm is receiving power
  • 9V Battery included
  • Loud 85 decibel alarm
  • 5 year warranty

SA302CNA

Battery Photo / Ion Smoke Alarm

  • Dual photoelectric and ionization smoke sensing technologies
  • Single button test / silence
  • Low battery warning
  • EZ Access battery door
  • 9V Battery included
  • Optional theft prevention lock
  • Microprocessor technology – Unit runs daily self check on all alarm functions
  • 10 year warranty

SA305CNA

10 Year Smoke Alarm

  • 10 year long life lithium battery included
  • Ionization smoke sensing technology
  • Single button test / silence
  • EZ Access battery door
  • Optional theft prevention lock
  • Low battery warning
  • 10 year warranty

SA340CNA

10 Year Sealed Tamper Proof Smoke Alarm

  • 10 year Power Cell: Lasts 10 years
  • Ionization smoke sensing technology
  • Single button test / silence
  • Tamper proof-sealed unit
  • Optional theft prevention lock
  • Low battery warning
  • 10 year warranty

SA304CNA

Battery Operated Smoke Alarm with Escape Light

  • Bright escape light: lights a path to safety
  • Ionization smoke sensing technology
  • Single button test / silence
  • EZ Access battery door
  • 9 volt battery included
  • Low battery warning
  • Optional theft prevention lock
  • 10 year warranty

PHOTOELECTRIC

SA710LCNA

Long Life Photoelectric Battery Powered Smoke Alarm

  • 10 year long life Lithium battery included
  • Optipath 360 Photoelectric Smoke Technology
  • Single button test / silence
  • 9 volt battery included
  • EZ Access battery door
  • 10 year warranty

SA710CNA

Photoelectric Battery Smoke Alarm

  • Optipath 360 Photoelectric Smoke Technology
  • Single button test / silence
  • Optional theft prevention lock
  • Low battery warning
  • Missing battery guard
  • 9 volt battery included
  • EZ Access battery door
  • 10 year warranty